[{"data":1,"prerenderedAt":205},["ShallowReactive",2],{"guide:\u002Fguides\u002Fgibson-1961-1975":3},{"id":4,"title":5,"body":6,"description":192,"draft":193,"extension":194,"heading":195,"kicker":196,"lede":197,"meta":198,"navigation":199,"path":200,"seo":201,"stem":202,"updated":203,"__hash__":204},"guides\u002Fguides\u002Fgibson-1961-1975.md","Gibson 6 Digit Serial Numbers: What to Check Instead",{"type":7,"value":8,"toc":182},"minimark",[9,13,19,22,27,50,60,63,67,76,79,83,91,95,98,104,108,111,115,127,149],[10,11,12],"p",{},"Three things on the instrument still carry a date when the digits don't, and they don't narrow it equally. Work them in this order: the stamp under the serial, then the potentiometer codes, then the headstock and the neck. The first one takes a single glance and cuts the span roughly in half.",[14,15],"gs-guide-decoder",{"brands":16,"placeholder":17,"scope-note":18},"gibson","e.g. 01161234","Gibson · decodes 1977 onward",[10,20,21],{},"One thing to know before you type: the decoder above is fixed to Gibson. With no brand chosen, a bare six-digit number is proposed to Martin and PRS instead, because it fits the shape of their formats too. Six digits alone say almost nothing about who built an instrument.",[23,24,26],"h2",{"id":25},"start-with-the-stamp-under-the-number","Start with the stamp under the number",[10,28,29,30,34,35,38,39,42,43,38,46,49],{},"Look directly under the serial number before you look anywhere else. This era carries two shapes, and which one is on your headstock cuts it roughly in half: with ",[31,32,33],"code",{},"MADE IN USA"," impressed under the digits you're in the later part, ",[31,36,37],{},"1970"," to ",[31,40,41],{},"1975","; with nothing under them, ",[31,44,45],{},"1963",[31,47,48],{},"1969",", the years the six-digit number ran before Gibson began stamping the country under it.",[10,51,52,53,55,56,59],{},"That lower bound is ",[31,54,45],{}," rather than ",[31,57,58],{},"1961"," for a plain reason. The numbers Gibson stamped in the first two years of this era are five digits long, so a six-digit number can't be one of them, and the era opens two years before anything this page can put a bound on.",[10,61,62],{},"One glance, and the digits are finished. Everything that follows reads a part of the instrument rather than a number.",[23,64,66],{"id":65},"then-read-the-potentiometers","Then read the potentiometers",[10,68,69,70,75],{},"The code on the back of a potentiometer is a date stamped by the company that made the part, in the week it made it. ",[71,72,74],"a",{"href":73},"\u002Fguides\u002Fpot-codes","Reading one"," is a page of its own; what matters here is how much of your span it takes off.",[10,77,78],{},"It settles a floor. An instrument can't have been finished before the parts inside it were made, so a pot stamped in the twenty-fourth week of a year rules out every year before that one. It settles no ceiling at all: pots were bought in bulk and fitted long after they were stamped, and in an instrument this old any of them may have been replaced since. A floor is still progress when the serial itself gives you fifteen years.",[23,80,82],{"id":81},"then-look-at-the-headstock-and-the-neck","Then look at the headstock and the neck",[10,84,85,86,38,88,90],{},"Two of the checks our table names have nothing to do with digits at all: the style of the logo, and whether there's a volute, the raised ridge of wood behind the nut, which Gibson used on instruments from ",[31,87,37],{},[31,89,41],{},". Neither puts a year on an instrument by itself. What they do is agree or disagree with the year the other checks produced, and a date that nothing on the instrument contradicts is a different thing from a date one check asserted.",[23,92,94],{"id":93},"why-the-factory-order-number-is-not-on-this-list","Why the factory order number is not on this list",[10,96,97],{},"Gibson stamped a second number inside the instrument, the factory order number, on the neck block or in the control cavity, and its letter code does carry a year. Guides to older Gibsons reach for it first, and you'll find it recommended for this era too.",[10,99,100,101,103],{},"It doesn't work here. Every source our table cites charts those letter codes as running out in ",[31,102,58],{},". That is the first year of this era, and two years before the six-digit numbers this page is about even begin. Look for the factory order number if the instrument turns out to be older than the span above. For anything inside the span, the letter isn't there to read.",[23,105,107],{"id":106},"what-you-end-up-with","What you end up with",[10,109,110],{},"A range. Specialists who date these instruments for a living work through the stamp, the pot codes and the specifications, the nut width, the knobs, the logo, and still answer with a span. A range arrived at that way is the finished job.",[23,112,114],{"id":113},"where-the-numbers-start-working-again","Where the numbers start working again",[10,116,117,118,121,122,126],{},"Everything above stops applying at ",[31,119,120],{},"1977",", where the digits start carrying the date themselves. The charts for that scheme, and for everything Gibson has done to it since, are on the ",[71,123,125],{"href":124},"\u002Fgibson-serial-numbers\u002Fgibson-1977-present","era page for the modern coding",".",[10,128,129,130,132,133,135,136,139,140,142,143,145,146,148],{},"One year falls between the two and is charted by neither. The six-digit shape above is charted through ",[31,131,41],{},", the eight-digit coding opens in ",[31,134,120],{},", and a ",[31,137,138],{},"1976"," instrument carries six digits that no chart we hold covers. The decoder declines it with every other six-digit number, and names the shape of the number instead of a range of years, because the only span that would take it ends the year before. The checks on this page are the ones to work through for a ",[31,141,138],{}," number too; only the ",[31,144,33],{}," split, which stops at ",[31,147,41],{},", has nothing to say about it.",[150,151,154],"gs-callout",{"title":152,"tone":153},"Why these are the checks","method",[10,155,156,157,159,160,162,163,165,166,162,168,170,171,162,173,175,176,179,180,126],{},"The checks above are the ones our Gibson table itself hands back with every declined reading of this era. Same three, same order, with the ",[31,158,33],{}," stamp first because it's the fastest of them. This page and the answer pull from the same table. The ",[31,161,45],{},"-to-",[31,164,48],{}," against ",[31,167,37],{},[31,169,41],{}," split, and the ",[31,172,37],{},[31,174,41],{}," volute, are documented by the independent specialist references our table cites alongside Gibson's own pages; the pot-code reading is sourced on its own guide. The factory order number came off that list in August ",[31,177,178],{},"2026",", when a re-read of all three of those references put the last of its letter codes at ",[31,181,58],{},{"title":183,"searchDepth":184,"depth":184,"links":185},"",2,[186,187,188,189,190,191],{"id":25,"depth":184,"text":26},{"id":65,"depth":184,"text":66},{"id":81,"depth":184,"text":82},{"id":93,"depth":184,"text":94},{"id":106,"depth":184,"text":107},{"id":113,"depth":184,"text":114},"Three checks that still date a Gibson from 1961 to 1975, in the order that narrows the span fastest: the stamp under the number, the pot codes, the headstock.",false,"md","What to check when a Gibson serial can't be dated","Gibson","For one stretch of Gibson's history the digits carry no date. The rest of the instrument still does. Here is the order to work through it in, and how far each check gets you.",{},true,"\u002Fguides\u002Fgibson-1961-1975",{"title":5,"description":192},"guides\u002Fgibson-1961-1975","2026-08-16","SyXHDcJ8FqDdgl0nGKRgIiGHTUulv3U-wVlA581wIHA",1788533579105]